Product Details:
Payment & Shipping Terms:
|
Temperature: | -30~±70℃ | Protection: | IP68 |
---|---|---|---|
Power Supply: | 380VAC±10% 50HZ 60HZ | Relative Humidity: | 95% |
Rotary Frequency: | 600times /h , Continue Working Time Less Than 15min/hour | Analog Signal: | 4-20mA DC |
Input Signal: | Profibus-DP、HART Choosable | ||
High Light: | 20mA Electric Rotory Actuator,18r/Min Electric Rotory Actuator,34NM Asynchronous Motor Actuator |
AI, MI series of intelligent electric actuators are driven by a three-phase asynchronous motor, decelerated by a worm gear, and drive the hollow output shaft to output torque. The reducer has a hand/electric switching mechanism. When the switching handle is in the manual device, the handwheel drives the hollow output shaft to rotate through the clutch: when it is electrically operated, the switching mechanism will automatically fall back to the electric position, the clutch and the turbine mesh, and are driven by three-phase electric The hollow output shaft rotates.
The rotation of the output shaft of the actuator is transmitted to the Hall effect pulse sensor through the speed increasing mechanism, and the axial displacement generated by the axial force of the motor worm is transmitted to the mechanical torque control mechanism (switch mechanism) to achieve valve position and torque control.
The intelligent controller of the electric actuator accepts standard analog current control signals or switch control signals or bus signals, and positions the output shaft of the actuator at the position corresponding to the input signal; it can also be based on interlocking control, two-wire control or The emergency ESD event signal is located at the preset position of the control system.
MODEL | Output speed (r/min) | Out shaft torque(NM) | Max. Valve shat dia(mm) | Min. Ouptut turn | Motor power(KW) | Rated current(A) | Flang (ISO5210) | note |
7AI | 18 24 36 | 34 34 31 | 26(32) | F10 | 0.31 | 1.6 | 5 | |
48 72 96 | 27 27 22 | 0.31 | 1.7 | |||||
11AI | 18 24 36 | 68 68 61 | 26(32) | F10 | 0.31 | 1.8 | 5 | |
48 72 96 | 54 54 43 | 0.31 | 2.1 | 10 | ||||
13AI | 24 36 | 108 95 | 26(32) | F10 | 0.31 | 2.5 | 10 | |
48 | 81 | |||||||
14AI | 18 24 36 | 163 163 135 | 38(51) | F14 | 0.75 | 3.2 | 15 | |
48 72 96 | 108 108 81 | 1.1 | 3.8 | |||||
16AI | 18 24 36 | 305 305 257 | 38(51) | F14 | 0.75 | 3.2 | 15 | |
48 72 96 | 203 203 149 | 1.1 | 3.8 | 20 | ||||
30AI | 18 24 36 | 542 542 508 | 54(67) | F16 | Can add side handwheel 1:15.5 | 1.5 | 6.2 | 25 |
48 72 96 | 407 407 325 | 2.2 | 11 | 30 | ||||
40AI | 18 24 36 | 1020 1020 845 | 64(76) | F25 | Can add side handwheel 1:12.75 | 2.2 | 11 | 30 |
48 72 96 | 680 680 540 | 3.7 | 10.5 | 50 | ||||
70AI | 18 24 36 | 1480 1480 1290 | 70(83) | F25 | Can add side handwheel 1:15 1:30 | 4.5 | 16 | 50 |
48 72 96 | 1020 1020 745 | 7.5 | 21 | 60 | ||||
90AI | 18 24 36 | 2003 2030 1700 | 70(83) | F30 | Can add side handwheel 1:15 1:30 | 4.5 | 16 | 50 |
48 72 96 | 1355 1355 1020 | 7.5 | 21 | 60 | ||||
95AI | 24 | 3000 | 70(83) | F30 | Can add side handwheel 1:15 | 5.5 | 22 | 60 |
70AI/IS15 | 12 | 5000 | 110 | F35 | Can add side handwheel 1:15 | 4.8 | 21 | 60 |
90AI/IS15 | 12 | 8000 | 110 | F35 | Can add side handwheel 1:15 | 7.5 | 21 | 60 |
APF7.820.077C PCB for ESP voltage controller spare, voltage and current signal process
380V AC Industrial Frequency Power ESP Controllers EPIC-III Controller Sampling Board, Trigger Board
Ignition Cble XDL-l B Explosion Proof High Performance Ignition System Device Cable Length 2, 3, 6m
Coal Feeder Spare main board , CPU board 9224 / CS2024 / EG24 ( Micro board )
Coal Feeder Spare degree probe for 9224 / CS2024 coal feeder, CS19900, C19900, CS8406
Coal Feeder Spare CS2024 and 9424 special coal feeder belt for electronic weighing type