Send Message
Home ProductsLow Voltage Protection Devices

48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply

48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply

  • 48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply
  • 48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply
48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply
Product Details:
Place of Origin: China
Brand Name: MEAN WELL
Model Number: DRT-240-48
Payment & Shipping Terms:
Minimum Order Quantity: 2 sets
Packaging Details: Wooden box packing
Delivery Time: 15 days after signing the contract
Payment Terms: T/T
Supply Ability: 1000sets
Contact Now
Detailed Product Description
MODEL: DRT-480-24 DC VOLTAGE: 48V
CURRENT RANGE: 0 ~ 10A VOLTAGE ADJ. RANGE: 48 ~ 55V
Output Type: Triple Working Temp: -20 ~ +60°C
High Light:

electrical protective devices

,

dc power contactor

Original SE-100-24 24V/4.5A Single Output AC to DC High-power Switching Power Supply

 

Features :  

  • Three-phase AC340-550V wide range input 
  • High efficiency 89% and low dissipation 
  • Protection : short circuit / overload / over voltage / over temperature 
  • Cooling by free air convection 
  • Built-in constand current limiting circuit 
  • Can be installed on DIN rail  TS-35/7.5  or 15 
  • UL508 ( industrial control equipment ) approved 
  • EN61000-6-2 ( EN50082-2)  indusctrial immunity level 
  • 100% full load burn-in test 
  • Fixed switching frequency at 70KHZ 
  • 3 Years warranty 
 
 
MODEL DRT-960-48
OUTPUT DC VOLTAGE 48V
RATED CURRENT 20A
CURRENT RANGE 0 ~ 20A
RATED POWER 960W
RIPPLE & NOISE (max.) 80mVp-p
VOLTAGE ADJ. RANGE 48 ~ 55V
VOLTAGE TOLERANCE ±1.0%
LINE REGULATION ±0.5%
LOAD REGULATION ±0.5%
SETUP, RISE TIME 200ms, 60ms/400VAC 200ms, 60ms/500VAC at full load
HOLD UP TIME (Typ.) 14ms/400VAC 30ms/500VAC at full load
INPUT VOLTAGE RANGE Three-Phase 340 ~ 550VAC (Dual phase operation possible in connecting L1,L3,FG Note.5)
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 92%
AC CURRENT (Typ.) 2A/400VAC 1.6A/500VAC
INRUSH CURRENT (Typ.) COLD START 50A
LEAKAGE CURRENT <3.5mA / 530VAC
PROTECTION OVERLOAD 105 ~ 125% rated output power
Protection type : Constant current limiting, unit will shut down o/p voltage after 3 sec. , re-power on to recover
OVER VOLTAGE 59 ~ 66V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE 110°C ± 5°C (TSW1) detect on heatsink of power switch 85°C ± 5°C (TSW1) detect on heatsink of power switch
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT WORKING TEMP. -20 ~ +60°C (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85°C , 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C)
VIBRATION Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4) SAFETY STANDARDS U508, UL60950-1, TUV EN60950-1 approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C / 70% RH
EMC EMISSION Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
OTHERS MTBF 122.5K hrs min. MIL-HDBK-217F (25°C )
DIMENSION 276*125.2*100mm (W*H*D)
PACKING 3.3Kg; 4pcs/14.2Kg/1.14CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Dual phase operation(connecting L1,L3,FG)is allowed under certain derating to output load. Please refer to the derating curves for details.
 

 

 

 

48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply 0

 

 

48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply 1

 

 

 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

Contact Details
Hontai Machinery and equipment (HK) Co. ltd

Contact Person: Ms. Biona

Tel: 86-755-83014873

Fax: 86-755-83047632

Send your inquiry directly to us (0 / 3000)

Other Products